CO2&Beverage Cylinders
CBMTECH aluminum CO2 cylinders are ideal for beverage service.Clean,corrosion-resistant,lightweight cylinders remain the ideal choice for commercial dispensing beers,larges,ciders,stouts and carbonated soft drinks,as well as for use home-dispensing devices.
Beverage Aluminum CO2 Cylinders Specification:Specification | Outside Diameter | Water Volume | Length | Weight | Wall Thickness | Working Pressure |
LW-60-0.6-30-H | 60 | 0.6L | 380mm | 1.2kg | 5.5mm | 30Mpa |
LW-108-1.0-15-H | 108mm | 1.0L | 210mm | 1.3kg | 5.5mm | 15Mpa |
LW-108-2.0-15-H | 108mm | 2.0L | 346mm | 2.1kg | 5.5mm | 15Mpa |
LW-140-4.0-15-H | 140mm | 4.0L | 420mm | 4.2kg | 7.1mm | 15Mpa |
LW-203-12.0-15-H | 203mm | 12.0L | 587mm | 12.8kg | 10.3mm | 15MPa |
LW-203-13.4-15-H | 203mm | 13.4L | 640mm | 13.8kg | 10.3mm | 15MPa |
LW-203-20.0-15-H | 203mm | 20.0L | 873mm | 17.0kg | 10.3mm | 15MPa |
CBMTECH Beverage Cylinders offer the Following Advantages:
-1).Cylinders are made from high strength Aluminum Alloy,reliable in durability,fracture toughness and resistance to tearing and cracking.
-2).Highly corrosion-resistant interior and exterior -ideal for wet gases.
-3).Cylinders perform well at low temperatures.
-4).Lightweight-up to 40 percent lighter than comparable steel cylinders and in Consistent weight,consistent thickness resist damage.
-5).Brushed external surface provides a low-maintenance finish.
-6).Cylinders meet or exceed International standard.
-7).Cylinders cycle-tested in excess of 100000 cycles at service pressure.Excess of 12000 cycles at test pressure.
-8).Minimum burst pressure tested up to 2.5 times service pressure without failure.
In addition to the CO2 beverage industry, we are also committed to the manufacture of other types of gas cylinders.These cylinders are used to fill with permanent gases, liquefied petroleum gas or compressed natural gas to serve a wide application in chemical industry, metallurgical industry, mechanical industry, petroleum industries, electronic industry, building industry and in the fields of fire fighting, energy, food process, household, medical treatment, cryogenic soldering, mountaineering, diving, mining,scientific research & etc.
*More Descriptions of Medical Aluminum Cylinders:
-1) water capacity: 0.28L, 0.7L, 1L, 1.7L, 2L, 2.5L, 2.7L, 3.2L, 4L, 6L, 8L, 10L, 15L, 20L, 40L, 50L and etc;
-2) diameter: 59-232mm;
-3) height: 194-725mm;
-4) weight: 0.4-36kgs;
-5) service pressure: 15MPa, 20MPa
-6) related valve for choice.Our Aluminum Alloy Gas Cylinders can be refilled with rare, high pure, calibration and special gases. They are made of superior quality aluminum alloy and manufactured through the procedures of punching, drawing, heat treatment, CNC flow forming spinning, anodic oxidation treatment to the inner surface, etc. It is used to be filled and refilled with various kinds of gases, such as rare gases, high purity gases, standard gases, special gases, with a wide range of applications in the chemical industry, electronic industry, medical treatment, gas and coal mining fields, which is the ideal substitute for the steel cylinder. We also have the ability to design and produce the seamless aluminum alloy cylinders with special specifications and technical requirements.
BTW, High Pressure seamless aluminium air cylinders are adopted to fill various compressed gas, including Industrial specialty gases, pure gases, gas mixtures and air. (Such as Argon, Chlorine, Ethane, Helium, Hydrogen, Neon, Nitrogen, Oxygen, Nitrogen monoxide, Nitrous oxide and etc).No | Specification | Outer Diameter | Water Volume | Length | Weight | Working pressure |
1 | LW-60-0.5-20-H | 60mm | 0.5L | 285mm | 0.59kg | 200bar |
2 | LW-75-0.7-15-H | 75mm | 0.7L | 295mm | 0.85kg | 150bar |
3 | LW-82-0.7-15-H | 82mm | 0.7L | 235mm | 0.9kg | 150bar |
4 | LW-89-1.0-15-H | 89mm | 1.0L | 269mm | 1.2kg | 150bar |
5 | LW-89-1.4-15-H | 89mm | 1.4L | 345mm | 1.4kg | 150bar |
6 | LW-108-1.0-15-H | 108mm | 1.0L | 210mm | 1.3kg | 150bar |
7 | LW-108-1.4-15-H | 108mm | 1.4L | 264mm | 1.6kg | 150bar |
8 | LW-108-2.0-15-H | 108mm | 2.0L | 346mm | 2.1kg | 150bar |
9 | LW-108-2.5-15-H | 108mm | 2.5L | 413mm | 2.5kg | 150bar |
10 | LW-120-2.0-15-H | 120mm | 2.0L | 320mm | 2.7kg | 150bar |
11 | LW-120-2.5-15-H | 120mm | 2.5L | 369mm | 3.0kg | 150bar |
12 | LW-120-2.8-15-H | 120mm | 2.8L | 398mm | 3.2kg | 150bar |
13 | LW-120-3.2-15-H | 120mm | 3.2L | 437mm | 3.5kg | 150bar |
14 | LW-140-4.0-15-H | 140mm | 4.0L | 420mm | 4.2kg | 150bar |
15 | LW-140-5.0-15-H | 140mm | 5.0L | 500mm | 4.9kg | 150bar |
16 | LW140-6.0-15-H | 140mm | 6.0L | 580mm | 5.6kg | 150bar |
17 | LW140-8.0-15-H | 140mm | 8.0L | 741mm | 7.2kg | 150bar |
18 | LW140-5.0-20-H | 140mm | 5.0L | 525mm | 6.3kg | 200bar |
19 | LW140-6.0-20-H | 140mm | 6.0L | 652mm | 7.98kg | 200bar |
20 | LW-159-10.0-15-H | 159mm | 10.0L | 730mm | 8.8kg | 150bar |
21 | LW-184-9.0-20-H | 184mm | 9.0L | 575mm | 12.0kg | 200bar |
22 | LW-184-10-20-H | 184mm | 10.0L | 620mm | 12.9kg | 200bar |
23 | LW-184-11-20-H | 184mm | 11.0L | 665mm | 14.2kg | 200bar |
24 | LW-184-12-20-H | 184mm | 12.0L | 710mm | 15.4kg | 200bar |
25 | LW-203-12-15-H | 203mm | 12.0L | 567mm | 11.8kg | 150bar |
26 | LW-203-20-15-H | 203mm | 20.0L | 873mm | 17kg | 150bar |
27 | LW-203-21.3-15-H | 203mm | 21.3L | 962mm | 19.9kg | 150bar |
28 | LW-204-12-20-H | 204mm | 12.0L | 610mm | 16.5kg | 200bar |
29 | LW-204-15-20-H | 204mm | 15.0L | 735mm | 18.7kg | 200bar |
30 | LW-204-20-20-H | 204mm | 20.0L | 940mm | 23.4kg | 200bar |
31 | LW-232-29.5-15-H | 232mm | 29.5L | 994mm | 30.2kg | 150bar |
32 | LW-232-30.0-15-H | 232mm | 30.0L | 1010mm | 30.5kg | 150bar |
33 | LW-232-33.4-15-H | 232mm | 33.4L | 1126mm | 31.3kg | 150bar |
34 | LW-232-40.0-15-H | 232mm | 40.0L | 1340mm | 36.5kg | 150bar |
35 | LW-232-20.0-20-H | 232mm | 20.0L | 750mm | 26.9kg | 200bar |
36 | LW-232-26.0-20-H | 232mm | 26.0L | 921mm | 30.7kg | 200bar |
37 | LW-232-30.0-20-H | 232mm | 30.0L | 1076mm | 36.4kg | 200bar |
38 | LW-232-31.5-20-H | 232mm | 31.5L | 1096mm | 38kg | 200bar |
39 | LW-232-40.0-20-H | 232mm | 40.0L | 1365mm | 44.1kg | 200bar |
40 | LW-250-40.0-15-H | 250mm | 40.0L | 1150mm | 36.7kg | 150bar |
41 | LW-250-46.4-15-H | 250mm | 46.4L | 1305mm | 38.7kg | 150bar |
42 | LW-250-47.5-15-H | 250mm | 47.5L | 1340mm | 42.0kg | 150bar |
43 | LW-250-50.0-15-H | 250mm | 50.0L | 1590mm | 39kg | 200bar |
44 | LW-250-40.0-20-H | 250mm | 40.0L | 1227mm | 46.3kg | 200bar |
45 | LW-250-50.0-20-H | 250mm | 50.0L | 1500mm | 56kg | 200bar |
*About Us:We are a professional manufacturer and supplier of Gas Cylinders Regulators, Oxygen Flowmeters, Medical Oxygen Flow Regulators, Medical Oxygen Kits, Oxygen Intake Devices, Gas O2 Valves, Medical Pin Index Valves, Medical Gas O2 Supply System Products, Gas O2 Cylinder Carts/Trolleys, Gas O2 Outlets, Ceiling Medical Pendants, Medical Gas Oxygen Respiratory Products and etc.
*Advantages We Have:-1).Original Manuacturer: Being a professional manufacturer, we have professional equipments for our manufactureing products, including Punch Machines, CNC Machines, and etc.;
-2)Large Output capability: We have the capability to produce more than 50, 000PCS of Medical Oxygen Flowmeters each month;
-3)Quality Control: With ISO13485 Quality Management system; All products have been tested before out of factory;
-4)Cost Advantages: We have cost advantage because our professional and scale economy;
-5)Series: We have different series and models, for different standards in different countries;
-6)Small order can be acceptable: M. O. Q. =50PCS;
-7)Exporting experience: We have over 5 years' experience for exporting.
*NOTES:-a). Various types of seamless steel/aluminum gas cylinders,cylinder valves & flowmeter regulators can be optional;-b).We have many advantages of satisfying our potential customers' MIXED needs of different sizes of HP steel gas(O2/Helium/Argon/CO2/N2) cylinders raning from 0.2L~68L @15Mpa/20Mpa & ISO3807-1/2 Dissolved Acetylene Cylinders(2L~60L),as well as cylinder regulators & cylinder carts.Anyway,should you have any intersts or some more info needed on our cylinder carts, medical/Industrial Gas Cylinders & allied gas items(Gas Cylinder valves,gas cylinder regulators,medical hospital central oxygen system products),you are really welcome to enquire us anytimeKey Contact: Ethan Liu (Exp. Mgr)
URL: http:// ; http:// Contact us if you need more details on CO2 Beer Cylinders. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminum Cylinders for CO2 Beverage、CO2&Beverage Cylinders. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Aluminum Alloy Gas Cylinders > Lightweight Beverage CO2 Cylinders